• Lubrication-Pump-DDB10
  • Lubrication-Pump-DDB10 - Pump Multi-Point
  • Lubrication-Pump-DDB10-Grease-Injection-Pump

DDB-10 Multi Point Lubrication Pump

Item No.: 3077
Max. Pressa di Prutituzione: : 100Bar
Electric Motor: 380VAC, 0.37kW, 50 / 60Hz
Tank Grease: 7L
Peso: 38Kgs
Lingua latina: Pumpere di lubrication multipunt per à i porti d'alimentazione di grassu 10
Features:
- 1 ~ 10 Porti di lubricazione dispunibili
- Gassiu finu à 7L, 0.37Kw, 380V muturi elettrici
- E dimensioni di stanzi di stallazione è più vita di serviziu
Related Products / Replacement: Pump Injector
DDB Pump Technical Data: DDB Pump PDF

Catigurìa:
  • Description
  • cunsiderate

Description

Lubrication Pump DDB-10

Bomba di lubricazione DDB-10 hè una pompa di inzione di grease multipunt con porte di ingrannu di 10 d'alimentazione di grease, dispunibule per u sistema di lubricazione centrale di grassu in pezzu, unicu o prugressivu. A custruzzione di a pompa di lubricazione hè una pistola di inedizioni d'alimentazione cù porte di grease 10 (Or menos, pò esse stampatu se qualchì portu ùn sò micca necessarii in u mumentu), sta bagnera di lubricazione hè spessu cunnessione cù splitteri di tipu di blocu per affruntà diverse exigenzi di lubricazione.

A stallazione di a pompa di lubricazione DDB-10 hè bonu facilissimu, à cunnettazione di ogni injectore di pumparta cù l'aceru o di u tubu plasticu cù cunnette, chì dispensanu ogni portu d'alimentazione di grassa à i punti di lubricazione necessarii, i tubi di trasportu di grassia seranu fissi per ribandi o straps. A pompa DDB-10 hè dispunibule per u mezzu di a penetrazione ùn hè micca menu di 265 (25, 150g) 1 / 10mm grease (NLGI0 # ~ 2 #), a temperatura di l'ambientazione di uperazione règula hè megliu mantenevvi entre 0 ~ 40.

It is necessary to clean the injector of lubrication pump and inlet port of grease lubrication system before filling grease in the grease reservoir, following the procedures to fill grease in DDB-10 pump and test the motor rotation of lubrication pump and each junction points after the completion of connection between lubrication pump and lubrication system or divider valves. The DDB-10 pump has been proved that multi-point lubrication pump can improve the work efficiency 5-time above if comparing with conventional lubrication methods, saving 2/3 lubricants, reduce maintenance costs about three times, extending service life of wear-out parts, the lubrication pump has characteristics of simple construct, easy to operate and installation, safe working, clean and other characteristics of lubricating oil and no special requirements for routine lubrication maintenance provides an effective way to work , but also for the efficient, fast, energy-efficient and safe for production and construction environment.

Description di grease lubrication pump:

Lubrication-Grease-Pump-DDB18-construct
Lubrication Pump Part List:

1. U mutore electricu; 2. Cucu internu; 3. Attrezzatura worm shaft; 4-5-6. Gears; 7. Ecciculari; 8. Connection Pin; 9. Discu impastatu; Piston 10.Inner; 11. Fatturone; 12. Gassu lucutore


Lubrication Pump DDB-10 Data Technical:

Max. PressurePunti alimentariPiste PistonStroke AdjustableAlimentazione Volume
10Mpa1010mm5mm0-0.2 ml / tempo
Tempu IntensiuTank VolumeMotorPeso
13 time / min7L0.37Kw, 1380r / min, 380V38Kgs 1232


Lubrication Pump DDB-10 Dimensione:

Lubrication-Pump-DDB-10-dimensioni

Note Of Grease Pump DDB-10 Before Operation:

  1. The multi-point lubrication grease pump DDB-10 should be installed in a place where the ambient temperature is suitable for working operation and small dust, which is convenient for oil or grease filling, adjustment, inspection and maintenance.
  2. The HL-20 gear oil must be added to the gear box to the oil level specified level.
  3. To add grease to pump reservoir the of the DDB-10 grease pump, the SJB-D60 manual fuel pump or the DJB-200 electric grease filling pump must be used to fill the grease to the pump reservoir of the DDB-10 grease pump. It is strictly forbidden to start the motor when there is no grease or oil in the reservoir.
  4. According to the arrow direction of rotation on the cover of the electric motor, the motor should be connected with stable wire and not reversed.
  5. The accuracy of the filter screen is not less than 0.2mm and should be cleaned regularly.
  6. The grease pump DDB-10 should be kept clean at all times. It is strictly forbidden to remove the reservoir cover, to prevent dirt from entering the pump chamber and affecting normal work.
Lubrication Pump DDB-10 Dimensione:Lubrication-Pump-DDB-10-dimensioni
errore:
GTranslate Your license is inactive or expired, please subscribe again!